A COMPLETE FIRE SUPPRESSION SYSTEM FOR CNC MACHINES
A COMPLETE PRE-ENGINEERED SYSTEM
- Designed to protect CNC Machining cabins
- Everything you need together in one box
FULLY AUTOMATIC
- Automatically detects and suppresses fire
- No electricity required
FAST DETECTION
- Installs directly INSIDE CNC Machining cabins – closer to where a fire can start
PROVEN TECHNOLOGY
- UL and FM-approved systems available
- Already protecting thousands of installations worldwide
THE FIREDETEC® DIFFERENCE
Rotarex FireDETEC® systems use a proprietary continuous linear sensor tube that reliably detects and actuates release of the extinguishing agent using pneumatic technology. It is more flexible, space efficient and cost effective versus alternative mechanical or electronic systems.
1. Quick & Easy installation directly inside CNC machines:
2. Early fire detection:
3. Instant suppression:
The flexible sensor tubing is easily installed directly on the walls and roof of the machining enclosure.
When in service, the tubing is pressurized with dry nitrogen to 16 bar.
The dynamics of pressurization make the tubing more reactive to heat.
2. Early fire detection:
If a flame-up occurs, the heat of the fire causes the pressurized sensor tube to burst at the hottest spot (approx. 110°C)
3. Instant suppression:
The sudden tube depressurization actuates the special pressure differential valve and instantly floods the entire cabinet area with CO2 extinguishing agent. The fire is quickly suppressed just moments after it began... minimizing damage and downtime.
CHOOSE FROM 3 SUPPRESSION AGENTS : A MATTER OF PREFERENCE
FM-200® AGENT
FIRE PROTECTION FLUID
PRE-ENGINEERED SYSTEM FOR CNC MACHINES
-
CNC Machine Fire Protection (2)
Connect with an Expert
Custom solutions • Technical advice • References
